Subscribe via email

Get RapidShare Premium Account Legally

By Nitin Adlakha On March 21, 2009 0 comments
Go to the link given below.

http://www.AWSurveys.com/HomeMain.cfm?RefID=adlaks

Here You Need To Register And Complete All The Surveys Given.

You Will Earn 27 $ On The Spot Which Will Take Only 5 Mins.

Then Select Your Referal Link And Give It To Your Friends.

When Your Friends Register Through Your Link You Will Earn 1.25 $ On Each Referal.

Then Go To Paypal And Make A Premium Account.

Dont Insert Any Credit Card Number.

Once The Account Is Created Then Go To The Previous Site .

Once The Amount Reaches 75$ By Refering Your Friends Reedem Your Money . The Amount Will Be Transferred To Your Paypal Account And You Will Be Able To Buy A Premium Account Easily.

Enjoy!!!!!!

Track Stolen Laptop

By Nitin Adlakha On March 20, 2009 3 comments
According to various surveys, 90% of laptops in India are stolen during travel. Worldwide, a laptop gets stolen every 12 seconds.
These figures are obviously alarming, and will only go up as laptop sales increase.
But the good thing is that IT industry has not leave any opportunity unexplored.
The solution to this is an Open Source Program. It enables you to map out your stolen laptop. And Adeona is one such Open Source solution.

Download it here

How to Use?

Installing Adeona is easy.
During installation it will ask for a password.
Remember the password carefully as it will be required when you try to retrieve position of your laptop.
Once installed Adeona will automatically start a background service.
By Default, the client sends update at randomly defined time, usually an update every 30 mins.
As the installation finishes it places an '.ost' file on the desktop.
This is the file you will need to determine the location of your laptop.
It's recommended to backup this file at a secure location away from your laptop.

Now to determine the location of the laptop, you would need to run Adeona Recovery Tools.
These tools are by default installed with the client, and can also be installed separately.
Once you run this tool, it will ask you for the '.ost' file and password for the file.
If authentication is successful, it will now coonect to its server and try to retrieve the last IP address from which Adeona client had sent the update.
Once it has retrieved the details, it will automatically save them on the desktop in a text file format.
This will include the last IP address and names of nearby routers if available.


Source: PCQuest


Speed Up Mozilla Firefox

By Nitin Adlakha On March 16, 2009 0 comments

Hi All, presenting before you a new Blog The Wandering Thoughts. Hope you guys like it..!! Appreciate your feedback..!!


Mozilla Firefox, Speed it up!

Speed up Mozilla FireFox

1. Type "about:config" in the address field.
2. Set the value of network.http.pipelining to "true".
3. Set the value of network.http.pipelining.maxrequests to "100".
4. Set the value of network.http.proxy.pipelining to "true"
5. Set the value of nglayout.initialpaint.delay to "0" (not availible in newer versions)

Create a Personal Screen Saver in Window XP

By Nitin Adlakha On March 16, 2009 0 comments
This isnt a tweak, but a great little feature! It works only in window XP.
For a great way to put your digital photos to work, try creating a slide show presentation for use as a screen saver. Here's how:

1. Right-click an empty spot on your desktop and then click Properties.

2. Click the Screen Saver tab.

3. In the Screen saver list, click My Pictures Slideshow.

4. Click Settings to make any adjustments, such as how often the pictures should change, what size they should be, and whether you'll use transition effects between pictures, and then click OK.

Now your screen saver is a random display of the pictures taken from your My Pictures folder.

Increase Download Speed

By Nitin Adlakha On March 08, 2009 0 comments

Hi All, presenting before you a new Blog The Wandering Thoughts. Hope you guys like it..!! Appreciate your feedback..!!


First of all download this wonderful program:

http://www.speedguide.net/files/TCPOptimizer.exe

Then when u start the program goto settings goto cable modem or dsl whatever u have.

Go to MaxMTU and set it to 1500 this is optimal anything above this will not work as well.

Thats about it!! Enjoy the speed!!

Detect Invisible Yahoo IDs

By Nitin Adlakha On March 04, 2009 0 comments

Hi All, presenting before you a new Blog The Wandering Thoughts. Hope you guys like it..!! Appreciate your feedback..!!


Hi friends,
this is not a trick.
It can be done by a website named http://detectinvisible.com.
All you just need to do is to visit the webpage and enter the yahoo ID which you want to check.
Just So Simple......
No need to install any software....

Boot WinXP Fast

By Nitin Adlakha On March 01, 2009 0 comments
Boot Winxp Fast

Follow the following steps

1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

Change Text on Start Button

By Nitin Adlakha On March 01, 2009 0 comments
Step 1 - Modify Explorer.exe File

In order to make the changes, the file explorer.exe located at C:\Windows needs to be edited. Since explorer.exe is a binary file it requires a special editor. For purposes of this article I have used Resource Hacker. Resource HackerTM is a freeware utility to view, modify, rename, add, delete and extract resources in 32bit Windows executables and resource files (*.res). It incorporates an internal resource script compiler and decompiler and works on Microsoft Windows 95/98/ME, Windows NT, Windows 2000 and Windows XP operating systems.

get this from h**p://delphi.icm.edu.pl/ftp/tools/ResHack.zip

The first step is to make a backup copy of the file explorer.exe located at C:\Windows\explorer. Place it in a folder somewhere on your hard drive where it will be safe. Start Resource Hacker and open explorer.exe located at C:\Windows\explorer.exe.

The category we are going to be using is "String Table". Expand it by clicking the plus sign then navigate down to and expand string 37 followed by highlighting 1033. If you are using the Classic Layout rather than the XP Layout, use number 38. The right hand pane will display the stringtable. We’re going to modify item 578, currently showing the word “start” just as it displays on the current Start button.

There is no magic here. Just double click on the word “start” so that it’s highlighted, making sure the quotation marks are not part of the highlight. They need to remain in place, surrounding the new text that you’ll type. Go ahead and type your new entry. In my case I used Click Me!

You’ll notice that after the new text string has been entered the Compile Script button that was grayed out is now active. I won’t get into what’s involved in compiling a script, but suffice it to say it’s going to make this exercise worthwhile. Click Compile Script and then save the altered file using the Save As command on the File Menu. Do not use the Save command – Make sure to use the Save As command and choose a name for the file. Save the newly named file to C:\Windows.


Step 2 – Modify the Registry

!!!make a backup of your registry before making changes!!!

Now that the modified explorer.exe has been created it’s necessary to modify the registry so the file will be recognized when the user logs on to the system. If you don’t know how to access the registry I’m not sure this article is for you, but just in case it’s a temporary memory lapse, go to Start (soon to be something else) Run and type regedit in the Open field. Navigate to:

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon

In the right pane, double click the "Shell" entry to open the Edit String dialog box. In Value data: line, enter the name that was used to save the modified explorer.exe file. Click OK.

Close Registry Editor and either log off the system and log back in, or reboot the entire system if that’s your preference. If all went as planned you should see your new Start button with the revised text.
Namecheap.com - Cheap domain name registration, renewal and transfers - Free SSL Certificates - Web Hosting

    Subscribe via email

    Enter your email address:

    Delivered by FeedBurner